CATALOGUE 2026 · 3 CORE RANGES · 11 PRODUCT LINES

Everything that goes
into the casegood.

Not a lamp catalogue — a furniture-electrical one. Sockets, nine LED lines and wireless charging, drawn to the same plate language and the same 24 V platform, so a guest room reads as one design instead of three purchases. Room controls we supply on request, not as a main line.

A Sockets & Power · B LED Lighting · C Controls & Switches (on request) · D Wireless Charging

A — 1 PRODUCT LINE

Sockets & Power

Socket plates specified together with the headboard, the desk and the minibar, so the cut-out is fixed before the panel is finished.

A socket in a hotel room fails on three things: the plate does not match the switches beside it, the USB module is an afterthought screwed on later, and the back-box does not fit the 16 mm panel the furniture factory actually uses. We make the plate, the module and the cut-out one drawing. Market standards (US NEMA, EU Schuko, UK BS 1363, CN GB) are tooled per project, not adapted with an adapter.

B — 9 PRODUCT LINES

LED Lighting

Nine product lines organised by where the light is installed, not by lamp type. Every line shares the same LED bins, so a room reads as one light source.

This is the core of the brand: nine lines that cover a guest room from the headboard to the ceiling track. They are developed as one system — the same bin code, the same 24 V platform, the same ultra-slim driver family and the same finishes — so a room does not end up with four slightly different warm whites. Open a line below to see the specification, the options and what comes in the box.

Nine lines on one platform: same 24 V, same LED bins, same ultra-slim driver family.

C — ON REQUEST

Controls & Switches

Switches, key-card power and scene panels, in the same plate family as the sockets so the wall reads as one system.

Controls are where a lighting scheme becomes usable. A guest should not need instructions: card in, lights come on warm; one button for night; everything off at the door. We supply the panel, the protocol module and the wiring diagram together, and the plate finishes match the socket range exactly.

Controls are not our main line. We supply the plate and the wiring for the room, and we build the switching to the control system your project already specifies — normally with the client's controls contractor, on a project-by-project basis. If the brief calls for a full room controller, we will say so and bring in a specialist rather than pretend it is our core.

D — 1 PRODUCT LINE

Wireless Charging

Desktop wireless charging that disappears into the furniture surface instead of sitting on top of it.

Guests charge on the bedside table, not on a dock. A charger that sits on the surface gets knocked, unplugged or stolen; one flush-mounted under the top leaves a clean desk, a single 60 mm hole and no cable in sight.

SIDE BY SIDE

All 12 lines at a glance

No.Product lineCCTCRIIPInput
WL-A1Hotel Socket & Outlet Plates——IP20100–250 V AC
WL-B1Headboard Linear Light2700 / 3000 / 4000 K · tunable option≥ 90 (R9 > 50) · CRI 95 optionIP2024 V DC, remote ultra-slim driver (18 mm)
WL-B2Wardrobe Lighting System3000 / 4000 K≥ 90IP20—
WL-B3Nightstand Sensor Light2200 K amber · 3000 K≥ 90 (3000 K version)IP2012 / 24 V DC · or 2000 mAh rechargeable
WL-B4Vanity Linear Light3000 / 4000 K · tunable option≥ 95, R9 > 90IP4424 V DC, remote driver
WL-B5Illuminated Bathroom Mirror3000–6000 K adjustable≥ 90 (CRI 95 option)IP44—
WL-B6Minibar Linear Light3000 / 4000 K≥ 90IP2024 V DC, driver in the cabinet base
WL-B7Cove Light2700 / 3000 / 4000 K · tunable≥ 90IP20 · IP54 option24 V DC, remote driver
WL-B8Downlight & Spotlight2700 / 3000 / 4000 K · tunable≥ 90 · CRI 95 optionIP20 · IP44 (bathroom zone 1)—
WL-B9Track Light3000 / 4000 K≥ 90IP20—
WL-C1Control Switches & Scene Panels——IP20100–240 V AC · 24 V DC (bus version)
WL-D1Desktop Wireless Charger——IP20USB-C, 12 V / 2 A (adapter included)

Indicative values — the approval drawing for your project is the controlling document.

NOT SURE WHICH LINE

Send the room type.
We will mark up the drawing.

Tell us the room type and the furniture detail, and we come back with the lines that fit — plus the cut-outs the furniture factory needs.

  • Guest room electrical & lighting packages
  • OEM / ODM for furniture manufacturers
  • Sample and specification requests

Your contact

Alan ChangBusiness Manager

We reply within one business day. Your details are used for this enquiry only.